3S Remote Battery Powered Actuators
The 3S Remote Battery Powered Actuator allows users to remotely control valves in their operating network without the large costs usually associated with network valve automation. With a small installation footprint and the ability to be retrofitted to existing network valves with no above ground infrastructure these actuators allow users to automate valves easily in under a day.
SIM controlled with no requirements for onsite power or cabling network operators can now automate any network valve with minimal disruption to supply and the general public.
Long life rechargeable batteries allow for completely off grid installations with battery life of 12-24 months. Batteries can be quickly and easily swapped on site and then recharged in under 4 hours. You can even charge the batteries on site with a solar charging station increasing battery life further. If you have power on site you don’t need a battery and can still control the actuators using SIM control rather than hardwired cabling and a PLC.
3S remote battery powered actuators can be easily controlled via a bespoke web portal or through existing SCADA systems
How could this benefit my water company??
- Easy valve operation at the push of a button
- Retrofits to existing valves with no need for chambers, telemetry cabling or on-site power
- Cost effective network automation – Low cost per valve operation.
- 80% project cost savings compared to traditional network automation methods
- Huge savings in operating expenses and carbon output
- Control valves directly via SCADA, bespoke control platform or web control portal
- Very small Installed footprint – Fully buried solution
- Completely off grid installation
- Installs in a few hours
- Large diameter valves = no problem
- Long life rechargeable batteries – Up to 2 years for average use valves
- SIM controlled – No need for additional in-field communication infrastructure
- Operate valves to set percentages of open/closed
- Calm networks operating profile built in – Avoiding transients and water hammer
- Allows operatives to concentrate on critical work rather than manual tasks
- Fully submersible – IP68 rated actuator and battery
- ATEX 2 rating for gas and waste water networks
- Extended product warranty available for up to 20 years operating life
Current customer product applications
- Resilience and Rezoning projects
- Emergency/Disaster planning – Water storage and redeployment
- Burst mitigation – Instant valve control – Risk reduction
- Operational cost and carbon impact reduction
- Critical valve automation – Valves near critical infrastructure
- Water quality improvement – Installed on DMA bordering valves
- Active DMA boundary valves – Active/Agile DMA’s
- Automated leakage localisation
- Autonomous automation & network control
- Aqueduct/Trunk main links & control point automation
- Automated abstraction and compensation
- Water conservation – Fast control and isolation of bursts
- Water tower and reservoir top inlet and outlet control